Tường xanh nhân tạo tùy chỉnh
Off-the-shelf panels do not fit every project. All Weather Greens thiết kế và sản xuất tường cây xanh nhân tạo theo yêu cầu cho kiến trúc sư, interior designers, brand owners, and project contractors who need a specific look, a specific size, or a specific performance specification — and who cannot accept the nearest stock design.
This page covers what is genuinely customisable, what a custom run costs you in time, and how to brief a project so the first sample is the right one.
Custom or Stock? A Decision Table
| Your situation | Best route | Why |
|---|---|---|
| Design already close to a catalogue mix; wall is flat and standard height | Stock — 34 designs in 50 × 50 cm | Dispatches in 5 working days, orderable from one panel |
| Colour or density needs to match a brand palette | Custom recipe | Species mix and density are set at production, not at installation |
| Curved wall, column wrap, or non-standard module | Custom dimensions | Panels can be cut on site, but a made-to-size module avoids waste and seams |
| Logo, chữ viết, or neon-ready backing | Custom build | Branding is integrated into the panel, not applied afterwards |
| Building requires a fire classification | Fire-retardant construction | Tested to EN 13501-1, report supplied against the SKU |
What We Can Customise
- Công thức phối lá — species mix, colour balance, Độ dày đặc, và kết cấu bề mặt khớp với mẫu tham chiếu hoặc mood board của bạn
- Kích thước — custom panel sizes and shapes for curved walls, cột, và bề mặt không đều
- Density grade — from facade grade (seen from below at distance) to high density for walls photographed close up
- Thương hiệu — integrated logos, chữ viết, và nền sẵn sàng gắn biển neon
- Hiệu suất — UV-stabilised outdoor builds and fire-retardant constructions for commercial codes
- Packaging — private label, thùng carton sẵn sàng bán lẻ, barcodes, and project-site delivery marking
What We Need From You
The quality of the first sample depends almost entirely on the brief. Send any of the following and we will work from it:
- Elevation or drawing — PDF, AI, DWG, or a dimensioned sketch. Overall width and height, plus the position of openings and services.
- Reference imagery — a photograph of the planting you want, or of a wall you have seen. Two or three references are better than one.
- Colour direction — Pantone, RAL, or a brand guideline. Colour is matched by eye against a physical sample, so a digital reference is a starting point, not a specification.
- Performance requirements — indoor or outdoor, sun exposure, fire classification required by the building, and any acoustic or weight limits.
Quy trình tùy chỉnh của chúng tôi
- Brief review — we confirm feasibility and flag anything that will not work before samples are made.
- Recipe proposal — a proposed species mix and density, with a digital visual or a physical sample.
- Sample approval — you approve a physical sample. This is the step that protects both sides: nothing goes into production against a photograph.
- Sản xuất — 10–15 working days after order and specification approval, with in-line checks against the approved sample.
- Pre-shipment QC — photographs sent before the container is sealed.
- Giao hàng — door-to-door with installation guidance, DDP where required.
Note on timing: custom development adds sample approval time trước khi the production clock starts. The production window itself is the same 10–15 working days as any other order, because the specification is fixed by then.
Minimum Order for Custom Work
Các bộ phối lá tùy chỉnh thường bắt đầu từ 200 tấm, because a new recipe requires a production setup that only makes sense at volume. Below that, the practical route is to start from the closest stock design and adjust packaging or accessories instead — we will tell you honestly which side of that line your project falls on.
Ứng dụng công trình
Tường cây xanh tùy chỉnh do chúng tôi sản xuất phục vụ sảnh khách sạn, tường điểm nhấn nhà hàng, mặt tiền cửa hàng bán lẻ, khu vực lễ tân văn phòng, gian hàng triển lãm, và cảnh quan nhà ở. If your project is in one of these categories, the application pages cover the specification detail: khách sạn, retail and restaurants, văn phòng.
Câu hỏi thường gặp
Tường cây xanh tùy chỉnh mất bao lâu?
Production runs in 10–15 working days after order and specification approval. Custom development adds sample approval time before that — typically one sample round if the brief is clear, more if the reference is ambiguous. Ask us for a dated schedule against your brief.
Quý khách có thể làm theo ảnh tham khảo không?
Đúng. Send the photo and we will propose the closest species mix, then confirm with a physical sample before production. A photograph tells us the look; the sample tells us whether we have matched it.
Có phí thiết kế không?
Tư vấn thiết kế ban đầu và đề xuất kỹ thuật số miễn phí cho các dự án đủ điều kiện. Physical sample development is also free; the buyer pays the freight.
What is the minimum for a custom mix?
Typically 200 panels. Below that, we will usually recommend the nearest stock design with adjusted packaging.
Can you do curved or shaped panels?
Đúng, within limits. Panels are rigid, so tight radii are built from narrower modules rather than bent panels. Send the radius and we will confirm the module size.
Do custom orders carry the same warranty?
Yes — 3 years outdoor against UV fade and 5 years indoor, on the same terms as stock lines, provided the approved specification is used.
Can you supply the test report for a custom build?
For fire-retardant constructions, yes — the report is issued against the tested construction, so the build must match it. We will confirm which construction your specification falls under.
Bắt đầu dự án tùy chỉnh của bạn: send your brief to [email protected] hoặc yêu cầu báo giá. If you are still comparing routes, của wholesale page covers volume tiers and container loading.