Постачальник штучних зелених стін Австралія — для торгівлі & Проєктне постачання

Factory-direct supply for the trade and project buyers. All Weather Greens supplies panels direct from China to Australian importers, оптовики, landscapers and fit-out contractors sourcing artificial green walls. This is a procurement route for resale and specified installations, not a local retail storefront. Trade buyers can still evaluate eligible stock panels individually before committing to production.

Begin with the project environment, selected SKU and panel format. Наша огляд штучних зелених стін і сторінка оптових поставок introduce the range; the quotation should identify the exact product being supplied.

Match the specification to the Australian project

Office feature walls, hospitality fit-outs, terrace screening and outdoor boundaries require different decisions. Опишіть пряме сонячне світло, орієнтації, weather exposure, supporting surface and maintenance access. Внутрішній продукт не слід замінювати на специфікацію для зовнішнього застосування лише через схожість листя.

ВстановленняЩо вказувати в специфікаціїЩо перевіряти
Внутрішня стіна для ресепшн або торгового залуДизайн листя, формат панелі, основа та обробка краївТочний SKU, затверджений зразок і потреби в проєктній документації
Зовнішня стіна або екранУФ-стійка конструкція, підібрана для заявлених умов експлуатаціїНаявні матеріали та підтвердження УФ-стійкості для конкретного SKU, а також відповідні умови гарантії
Інтер'єр із критеріями вогнестійкостіВогнезахисний варіант, підібраний відповідно до проєктного завданняНаявний обсяг звіту та відповідність запропонованому продукту й конструкції
Відкрита межа або підвищений елементВідповідні панелі з окремо спроєктованими опорами та кріпленнямиОснова проєктувальника, оцінка анкерного кріплення та вітрового навантаження

Огляд внутрішні панелі, зовнішні УФ-стійкі варіанти і вогнезахисні конструкції. Request relevant evidence where available. The two fire-retardant SKUs with EN 13501-1 documentation must be matched to the proposed product. A report does not certify the complete installed system or establish local project approval; your project reviewer must decide whether the evidence meets the brief.

Warranty coverage is not a blanket promise for every panel. Ask for the written terms applicable to the quoted SKU, intended exposure, installation and maintenance conditions. Resolve exclusions before ordering rather than relying on a general indoor or outdoor duration.

Формати, SKU availability and minimum orders

Eligible 50 × 50 cm stock panels start from 1 panel, subject to availability confirmation for the selected SKU. That option can help a trade buyer assess a real sample; it does not mean every foliage design is available from stock or in every dimension.

Standard 100 × 100 cm production requires a minimum of 50 m² per design. Different designs cannot be combined to reach the minimum. Fire-retardant and custom builds are quoted individually, including their applicable minimum and specification.

Compare panel formats і custom supply options. Record the selected design reference, dimensions and build in the quotation and sample approval. Provide net wall area, openings, returns and cutting allowances so quantities are based on your installation plan.

From trade enquiry to approved order

  1. Submit the brief. Include measured area or drawings, застосування, вплив, preferred foliage, розміри панелей, destination and target installation date.
  2. Compare the quotation. Check SKU, production or stock status, quantity, applicable minimum, пакування та будь-які індивідуальні або вогнестійкі рішення. Уточніть, які підтвердні документи доступні.
  3. Підтвердіть реальний зразок. Використання запити на зразки щоб визначити фактичний SKU зразка. Підтвердіть наявність безкоштовного відповідного зразка та узгодьте вартість доставки окремо до відправлення. Перевірте колір, щільність, основа, стики та вигляд країв.
  4. Затвердіть специфікацію. Узгодьте референс зразка із замовленою конфігурацією, креслення та необхідні документи. Зафіксуйте кількість, умови оплати, умови поставки та відповідальність у замовленні.
  5. Підготуйте монтаж. перегляньте рекомендації щодо монтажу з монтажником. Проєктний дизайнер повинен визначити відповідні опори, основа та кріплення, особливо для відкритих або висотних конструкцій.

Зразок допомагає оцінити зовнішній вигляд і зручність обробки. Він не замінює звіт про пожежну безпеку, конструктивне проєктування або підтвердження характеристик для конкретного SKU. If the sample differs from the final production build, clarify the differences and approve the actual specification before proceeding.

Виробництво, freight and responsibility boundaries

Production lead time is 10–15 робочих днів після підтвердження замовлення та специфікації. Freight is additional. Confirm the order-specific schedule and any custom scope in the quotation, then plan freight, destination handling and site delivery separately. Stock and sample dispatch arrangements are checked independently; express service does not guarantee an arrival date.

Supply is quoted for the agreed Australian destination, without implying a local warehouse or fulfilment partner. Ask for the named port or delivery address and the proposed term. Under FOB, the buyer arranges main carriage and destination handling. CIF includes agreed freight and insurance to the named port, but not automatic final-site delivery. Risk transfer and insurance scope still need to be understood.

If DDP is proposed, confirm feasibility, the named destination, import responsibilities and included charges in writing. Specify whether unloading, access constraints and onward transport are included. The delivery term must be explicit rather than assumed from a freight estimate.

Request applicable commercial invoice, пакувальний лист, origin documentation and product evidence on request, where available. Confirm import arrangements and document needs with your logistics adviser. No document package guarantees clearance, permission or acceptance of the completed installation.

Часті запитання

Is this a retail service for Australian home buyers?

The focus is trade and project supply, not a local retail storefront. Trade sample evaluation remains available through eligible stock SKUs, subject to availability.

Can I request a single panel before ordering?

Eligible 50 × 50 cm stock SKUs start from 1 panel after stock confirmation. Ask for the actual reference of a free eligible sample and confirm courier costs separately.

What is the standard production minimum?

Standard 100 × 100 cm production starts at 50 m² per design, without combining different designs. Fire-retardant and custom minimums are quoted individually.

Can any panel be used outdoors?

Ні. Specify an outdoor SKU for the proposed exposure and request available evidence and its applicable warranty terms; appearance alone does not establish suitability.

Will fire-retardant documentation approve the installation?

Not automatically. Ask which documents are available for the quoted build, then have the project reviewer assess the report scope against the installation criteria.

Does production lead time include Australian delivery?

Ні. Production is 10–15 working days after order and specification approval. Transport and destination delivery are separate and confirmed for the order.

Do panel specifications establish wind-load performance?

Ні. Support and fixing design belong to the project designer. Product foliage, UV information and sample appearance do not verify structural performance.

Request a trade quotation

Send area, креслення, застосування, вплив, foliage references, розміри, documentation needs and destination through our contact page. Include your preferred delivery term and target installation date so the quotation can separate product specification, виробництво, freight and sample arrangements.