Artificial Foliage for Green Walls, Planters and Displays

Artificial foliage is manufactured greenery: leaves and stems shaped on wire and made from virgin PE, used where living plants cannot be maintained — green wall infill, jardineiras, reception displays and event work. All Weather Greens supplies 37 seven-stem designs factory-direct, in wholesale quantities, with free samples for trade buyers.

What artificial foliage is made of

Our foliage is moulded from 100% virgin PE (polietileno) — not recycled plastic of unknown origin. Each stem is built on a flexible wire core, so installers can bend, fan and compress the foliage by hand to fit a wall grid, a planter or a table arrangement. Colour is set in the material, so the leaf does not need painting or touch-up after installation.

37 designs, one format: seven stems per bush

The AWG-FOL series covers 37 styles — begonia, caládio, camélia, folha de videira, monstera, perila, Persian fern and more. Every bush carries seven stems on wire, approximately 30–34 cm long depending on the design. The uniform format is deliberate: it lets a buyer mix varieties in one order and still get consistent packing, consistent carton counts and consistent installation behaviour across a project.

Where artificial foliage is used

• Preenchimento de parede verde — filling gaps between panels, softening edges and adding variety to a single-species wall. See the gama de painéis de parede verde artificial.
• Planters and troughs — seven stems fan out to fill a planter without bulk. The planter itself stays with the client.
• Event and display work — reusable, packable and consistent between setups, which matters when a display is rebuilt every week.
• Retail and hospitality styling — shelf edges, table centres and reception details where fresh foliage would need daily replacement.

Buying artificial foliage wholesale

• Quantidade mínima de encomenda: 500 pcs por variedade. Several varieties can be combined in one order to reach the minimum.
• Embalagem: 300 pcs por caixa.
• Produção: 10 a 15 dias úteis após a aprovação do pedido e das especificações.
• Amostras: free for trade enquiries; the buyer pays the courier.
• Custom work: custom foliage mixes, colours and private label, developed from approved samples.

For the full range with specifications per design, ver caules e ramos de verdura artificial. If you are combining foliage with wall panels, o guide to designing with 7-stem foliage covers mixing and spacing. Trade terms and documents are set out on the wholesale supply page.

All 36 artificial foliage designs

AWG-FOL-32 Arbusto de folhas variegadas tipo botão com 7 hastes – 32 cmAWG-FOL-33 Arbusto de Folhas de Amoreira com 7 Hastes – Não. 1 – 29 cmAWG-FOL-34 Arbusto de Folhas de Amoreira com 7 Hastes – Não. 2 – 29 cmAWG-FOL-35 Arbusto de Folhas de Aucuba Salpicadas com 7 Hastes – Não. 1 – 32 cmAWG-FOL-36 Arbusto de Folhas de Aucuba Salpicadas com 7 Hastes – Não. 2 – 32 cmAWG-FOL-37 Arbusto de Folhas com Nervuras Reticuladas com 7 Hastes – 30 cmAWG-FOL-30 Arbusto de folhas de caládio mini com 7 hastes – No. 3 – 30 cmAWG-FOL-31 Arbusto de folhas com nervuras brancas com 7 hastes – 34 cmAWG-FOL-17 Arbusto de folhas de begónia de bordos amarelos com 7 hastes – 32 cmAWG-FOL-18 Arbusto de folhas perenes chinesas com 7 hastes – 32 cmAWG-FOL-19 Arbusto de folhas de uva verde com 7 hastes – 32 cmAWG-FOL-20 Arbusto de folhas de rosa mini variegadas com 7 hastes – No. 1 – 32 cmAWG-FOL-21 Arbusto de folhas de feto persa com 7 hastes – 33 cmAWG-FOL-22 Arbusto de folhas mini em forma de coração com 7 hastes – 30 cmAWG-FOL-23 Arbusto de folhas variegadas em forma de coração com 7 hastes – 33 cmAWG-FOL-24 Arbusto de folhas em forma de coração com 7 hastes – 33 cmAWG-FOL-25 Arbusto de folhas de perila vermelha mini com 7 hastes – 33 cmAWG-FOL-26 Arbusto de folhas de monstera mini com 7 hastes – 33 cmAWG-FOL-27 Arbusto de folhas de camélia com 7 hastes – 33 cmAWG-FOL-28 Arbusto de folhas de caládio mini com 7 hastes – No. 1 – 30 cmAWG-FOL-29 Arbusto de folhas de caládio mini com 7 hastes – No. 2 – 30 cmArbusto de folha de maçã vermelha com 7 hastes AWG-FOL-16 – 32 cmAWG-FOL-0Arbusto de folhas com padrão zebra e 7 hastes, 3 unidades – 32 cmAWG-FOL-0Arbusto de folhas de aucuba variegada vermelha com 7 hastes, 4 unidades – 32 cmAWG-FOL-0Arbusto de folhas de videira de bordos vermelhos com 7 hastes, 5 unidades – 32 cmAWG-FOL-0Arbusto de folhas de morangueiro com 7 hastes, 6 unidades – 32 cmAWG-FOL-0Arbusto de folhas de batata-doce de bordos vermelhos com 7 hastes, 7 unidades – 32 cmAWG-FOL-0Arbusto de folhas de pothos verde com 7 hastes, 8 unidades – 32 cmAWG-FOL-0Arbusto de folhas de batata-doce de bordos brancos com 7 hastes, 9 unidades – 32 cmAWG-FOL-10 Arbusto de folhas de pena roxa com 7 hastes – 32 cmAWG-FOL-11 Arbusto de folhas de macieira de listras brancas com 7 hastes – 32 cmAWG-FOL-12 Arbusto de folhas de perila roxa com 7 hastes – 32 cmAWG-FOL-13 Arbusto de folhas de perila verde com 7 hastes – 32 cmArbusto de folha de cróton com 7 hastes AWG-FOL-14 – 32 cmAWG-FOL-15 Arbusto de folhas de macieira de outono com 7 hastes – 32 cmAWG-FOL-01 Arbusto de Folha em Forma de Coração Verde com 7 Caules – 32 cm

Perguntas frequentes

What is the difference between artificial foliage and artificial plants?

Foliage means the leaves and stems themselves — sold as loose stems or bushes for filling, mixing and arranging. An artificial plant is a finished piece, usually potted and shaped as a complete unit. Buyers who want to control the look of a planter or a wall normally buy foliage; buyers who want a finished object buy a plant.

Can artificial foliage be shaped to fit a specific planter?

Sim. Each stem runs on a flexible wire core, so the foliage can be bent outward to widen a display or compressed to fit a narrow trough. The seven-stem format gives enough spread for a standard planter without needing to combine several products.

What is the minimum order for wholesale artificial foliage?

500 pcs por variedade, e várias variedades podem ser combinadas numa só encomenda. Packing is 300 pcs per carton, and production takes 10–15 working days after order and specification approval.