맞춤형 인조 벽면녹화

Off-the-shelf panels do not fit every project. All Weather Greens는 특정한 룩과, interior designers, brand owners, and project contractors who need a specific look, a specific size, or a specific performance specification — and who cannot accept the nearest stock design.

This page covers what is genuinely customisable, what a custom run costs you in time, and how to brief a project so the first sample is the right one.

Custom or Stock? A Decision Table

What We Can Customise

• 식물 구성 — species mix, colour balance, 밀도, 및 텍스처를 참고 자료나 무드보드에 맞춰 조정
• 치수 — custom panel sizes and shapes for curved walls, 기둥, 및 불규칙한 표면
• Density grade — from facade grade (seen from below at distance) to high density for walls photographed close up
• 브랜딩 — integrated logos, 레터링, 및 네온사인 설치가 가능한 백킹
• 성능 — UV-stabilised outdoor builds and fire-retardant constructions for commercial codes
• Packaging — private label, 소매 진열용 카톤, barcodes, and project-site delivery marking

What We Need From You

The quality of the first sample depends almost entirely on the brief. Send any of the following and we will work from it:

• Elevation or drawing — PDF, AI, DWG, or a dimensioned sketch. Overall width and height, plus the position of openings and services.
• Reference imagery — a photograph of the planting you want, or of a wall you have seen. Two or three references are better than one.
• Colour direction — Pantone, RAL, or a brand guideline. Colour is matched by eye against a physical sample, so a digital reference is a starting point, not a specification.
• Performance requirements — indoor or outdoor, sun exposure, fire classification required by the building, and any acoustic or weight limits.

맞춤 제작 프로세스

1. Brief review — we confirm feasibility and flag anything that will not work before samples are made.
2. Recipe proposal — a proposed species mix and density, with a digital visual or a physical sample.
3. Sample approval — you approve a physical sample. This is the step that protects both sides: nothing goes into production against a photograph.
4. 생산 — 10–15 working days after order and specification approval, with in-line checks against the approved sample.
5. Pre-shipment QC — photographs sent before the container is sealed.
6. 납품 — door-to-door with installation guidance, DDP where required.

Note on timing: custom development adds sample approval time 고정하기 the production clock starts. The production window itself is the same 10–15 working days as any other order, because the specification is fixed by then.

Minimum Order for Custom Work

맞춤형 조화 구성은 일반적으로 200패널부터 시작합니다, because a new recipe requires a production setup that only makes sense at volume. Below that, the practical route is to start from the closest stock design and adjust packaging or accessories instead — we will tell you honestly which side of that line your project falls on.

프로젝트 적용 사례

당사가 제조하는 맞춤형 그린월은 호텔 로비, 레스토랑 포인트 월, 리테일 매장, 오피스 리셉션 공간, 전시 부스, 그리고 주거 조경에 사용됩니다. If your project is in one of these categories, the application pages cover the specification detail: 호텔, retail and restaurants, 사무실.

자주하는 질문

맞춤형 그린월은 얼마나 걸리나요?

Production runs in 10–15 working days after order and specification approval. Custom development adds sample approval time before that — typically one sample round if the brief is clear, more if the reference is ambiguous. Ask us for a dated schedule against your brief.

참고 사진과 동일하게 제작할 수 있나요?

예. Send the photo and we will propose the closest species mix, then confirm with a physical sample before production. A photograph tells us the look; the sample tells us whether we have matched it.

디자인 비용이 있나요?

초기 디자인 상담과 디지털 제안서는 적격 프로젝트에 한해 무료입니다. Physical sample development is also free; the buyer pays the freight.

What is the minimum for a custom mix?

Typically 200 panels. Below that, we will usually recommend the nearest stock design with adjusted packaging.

Can you do curved or shaped panels?

예, within limits. Panels are rigid, so tight radii are built from narrower modules rather than bent panels. Send the radius and we will confirm the module size.

Do custom orders carry the same warranty?

Yes — 3 years outdoor against UV fade and 5 years indoor, on the same terms as stock lines, provided the approved specification is used.

Can you supply the test report for a custom build?

For fire-retardant constructions, yes — the report is issued against the tested construction, so the build must match it. We will confirm which construction your specification falls under.

맞춤 프로젝트 시작하기: send your brief to [email protected] 또는 견적 요청. If you are still comparing routes, 그 wholesale page covers volume tiers and container loading.