カスタム人工緑壁

Off-the-shelf panels do not fit every project. All Weather Greensは、特定の外観を求める建築家やブランドオーナー向けに、カスタム人工グリーンウォールを設計・製造しています, interior designers, brand owners, and project contractors who need a specific look, a specific size, or a specific performance specification — and who cannot accept the nearest stock design.

This page covers what is genuinely customisable, what a custom run costs you in time, and how to brief a project so the first sample is the right one.

Custom or Stock? A Decision Table

What We Can Customise

• 葉材の構成 — species mix, colour balance, 密度, お客様の参考資料やムードボードに合わせた質感
• 寸法 — custom panel sizes and shapes for curved walls, 柱, 不規則な表面
• Density grade — from facade grade (seen from below at distance) to high density for walls photographed close up
• ブランディング — integrated logos, 文字入れ, ネオンサイン対応の下地
• 性能 — UV-stabilised outdoor builds and fire-retardant constructions for commercial codes
• Packaging — private label, 小売対応カートン, barcodes, and project-site delivery marking

What We Need From You

The quality of the first sample depends almost entirely on the brief. Send any of the following and we will work from it:

• Elevation or drawing — PDF, AI, DWG, or a dimensioned sketch. Overall width and height, plus the position of openings and services.
• Reference imagery — a photograph of the planting you want, or of a wall you have seen. Two or three references are better than one.
• Colour direction — Pantone, RAL, or a brand guideline. Colour is matched by eye against a physical sample, so a digital reference is a starting point, not a specification.
• Performance requirements — indoor or outdoor, sun exposure, fire classification required by the building, and any acoustic or weight limits.

カスタムの流れ

1. Brief review — we confirm feasibility and flag anything that will not work before samples are made.
2. Recipe proposal — a proposed species mix and density, with a digital visual or a physical sample.
3. Sample approval — you approve a physical sample. This is the step that protects both sides: nothing goes into production against a photograph.
4. 生産 — 10–15 working days after order and specification approval, with in-line checks against the approved sample.
5. Pre-shipment QC — photographs sent before the container is sealed.
6. 納品 — door-to-door with installation guidance, DDP where required.

Note on timing: custom development adds sample approval time 前に the production clock starts. The production window itself is the same 10–15 working days as any other order, because the specification is fixed by then.

Minimum Order for Custom Work

カスタム foliage ミックスは通常200パネルから承ります, because a new recipe requires a production setup that only makes sense at volume. Below that, the practical route is to start from the closest stock design and adjust packaging or accessories instead — we will tell you honestly which side of that line your project falls on.

プロジェクト用途

当社が製造するカスタムグリーンウォールは、ホテルのロビーに採用されています, レストランのアクセントウォール, 小売店舗, オフィスの受付エリア, 展示ブース, 住宅のランドスケープ. If your project is in one of these categories, the application pages cover the specification detail: ホテル, retail and restaurants, オフィス.

よくある質問

カスタムグリーンウォールの納期はどのくらいですか?

Production runs in 10–15 working days after order and specification approval. Custom development adds sample approval time before that — typically one sample round if the brief is clear, more if the reference is ambiguous. Ask us for a dated schedule against your brief.

参考写真に合わせることはできますか?

はい. Send the photo and we will propose the closest species mix, then confirm with a physical sample before production. A photograph tells us the look; the sample tells us whether we have matched it.

デザイン料はかかりますか?

初回のデザイン相談とデジタル提案は、条件を満たすプロジェクトでは無料です. Physical sample development is also free; the buyer pays the freight.

What is the minimum for a custom mix?

Typically 200 panels. Below that, we will usually recommend the nearest stock design with adjusted packaging.

Can you do curved or shaped panels?

はい, within limits. Panels are rigid, so tight radii are built from narrower modules rather than bent panels. Send the radius and we will confirm the module size.

Do custom orders carry the same warranty?

Yes — 3 years outdoor against UV fade and 5 years indoor, on the same terms as stock lines, provided the approved specification is used.

Can you supply the test report for a custom build?

For fire-retardant constructions, yes — the report is issued against the tested construction, so the build must match it. We will confirm which construction your specification falls under.

カスタムプロジェクトを始める: send your brief to [email protected] または 見積もりを依頼する. If you are still comparing routes, その wholesale page covers volume tiers and container loading.